|
|
LAB-TEC JR. ANALYZER
|
|
| |
|
 |
|
The Lab-Tec Jr. is a
programmable spectrophotometer designed for reliable, low volume analysis. |
|
|
|
|
|
|
|
| |
Specifications |
Photometric
Linear Measurement Range:
|
0.00 to 2.50 Absorbance units (A) |
Photometric
Accuracy: |
+ / - (1% of the reading + 0.005
A) |
| Stability: |
drift of no more than 0.005A in
8 hours |
| Light Source: |
Tungsten Halogen |
| Standard Wavelengths: |
340, 405, 450, 492, 545, 600nm
|
| Type of filter: |
3 cavity sealed interference,
10nm half band pass |
| Tube Size: |
Std is 12mm round |
| Min. fill volume accessory:
|
1ml for 12mm tube, 250uL with
aspirator |
|
|
| Electronic |
|
| Display: |
alpha numeric, 16 character red
LED |
| Printer: |
Thermal dot matrix |
| Keyboard: |
16 key domed membrane switch,
enunciating |
| Power Requirements: |
115 V or 230 V AC, 50-60 Hz
(switch selectable) |
|
|
| Software |
|
| Speed |
reads, calculates and prints
results in 3 seconds/tube single point calibration by standard or factor, uptake, multi
point calibration with point to point curve fit, rate by standard or factor (batch or
singly) |
Test Menu: |
More than 50 open channels to store tests. Stores all parameters
including wavelengths, calculations, unit codes linear and normal ranges, rate timing,
standard values and previous standard curve. |
Other |
|
| Temp. |
37 degrees C, block stays on,
cell has on/off switch |
| Enclosure |
painted flame retardant ABS
plastic cover with metal base |
| Dimensions |
Approx. 9 x12 x
3 in (23 x 30 x 8cm), 15lbs, (6.8Kg) |
|
|
| Aspiration Cell
Accessory Specifications |
Min. Aspiration Volume |
250 uL at 7" of vaccum |
| Volume options |
300, 350, 400, 450, and 500uL |
| Equivalent path length |
1cm path |
| Carry over |
0.2% at 500uL and 1 cps |
|
0.8% at 250uL and 1 cps |
- PO #
1237 - De Soto, TX 75123 - T:
972.293.1605 - F: 972.293.1615 - |
|
|
|
